ProMRI SystemCheck

This website will assist you in determining whether an implanted BIOTRONIK ProMRI system is MR conditional in the country/region where the MRI scan will be performed. The website will guide you through the large variety of system-specific MR conditions by requesting information on the implanted device and lead combination. All entered data will be deleted when leaving the web page.

Please wait, checking input.
Sorry, the serial number check is currently unavailable. Please enter the device name or order number instead. We are working quickly to recover this service.
1. Please enter the country/region where the MRI scan will be performed
The name could not be found.
Please check your input. Make sure you enter the country/region name in the currently selected language. This website provides worldwide support, except for Japan. For MRI information in Japan please check the following webpage: www.pro-mri.jp.
MRI scan in:
2. ICD, pacemaker or cardiac monitor (BIOTRONIK products only)
Please check your input. Make sure you entered the device name, order number or serial number correctly.
Device:
3. Leads (BIOTRONIK products only)


Leads:
Patient name
Date of birth
MRI scan in:
Device:
Leads:
The system is MR conditional.
Warning: This website provides information on the MRI compatibility of the implanted system. This information on MRI compatibility does not, however, replace the product and application instructions in the ProMRI manual. Users must not rely solely on this information, but must carefully read and observe the ProMRI System Technical Manual for proper use of the implanted system for treatment and determination of MRI compatibility.
MRI scanner
Field strength
Isocenter position
Slew rate
Whole body SAR

Further MR conditions
  • You can find detailed information about the requirements, conditions and measures for safely conducting an MRI scan in the ProMRI manual .
  • The device is programmed to an MRI mode before the MR scan.
To ensure the best printing experience, we recommend using the ProMRI SystemCheck on a desktop computer.
Reset & restart
ProMRI manual Share result
ProMRI website
Privacy statement

Privacy statement

Imprint

Imprint

Company Name: BIOTRONIK SE & Co. KG

Address: Woermannkehre 1, 12359 Berlin, Germany

Tel: + 49 - 30 - 6 89 05 - 0

Fax: + 49 - 30 - 6 84 40 - 60

e-Mail: impressum@biotronik.de

Limited Partnership having its registered place of business in Berlin

Commercial Register No.: Berlin-Charlottenburg HRA 6501 B

General partner: BIOTRONIK MT SE

Commercial Register No.: Berlin-Charlottenburg HRB 118866 B

Managing Directors: Dr. Alexander Uhl (Chairman), Dr. Andreas Hecker, Holger Krumel

Ust ID No.: DE 136651322

FAQ - Country/Region
Where to get help?

Please contact us   here   if you need assistance.

Why is the selection of a country/region required?

In general, the use of medical devices is only allowed if they are approved. As the approval process takes a different amount of time in each country, MR conditions and available MR conditional systems may differ from country to country. To make sure that only approved products and conditions will be shown, the country where the scan will take place must be selected. You can find detailed information about the requirements, conditions and measures for safely conducting an MRI scan in the ProMRI System Technical Manual.

FAQ - ICD, pacemaker or cardiac monitor
Where to get help?

Please contact us   here   if you need assistance.

Where can I find the serial number or the product name?

The serial number and product name can be found on:

Where can I find the order number of the product?
Will the data be stored?

None of the entered data will be stored. Neither data such as the serial number, product names or order numbers, nor the result will be stored.

Patient ID card
FAQ - Leads
Where to get help?

Please contact us   here   if you need assistance.

Where can I find the serial number or the product name?

The serial number and product name can be found on:

Where can I find the order number of the product?
Will the data be stored?

None of the entered data will be stored. Neither data such as the serial number, product names or order numbers, nor the result will be stored.

Patient ID card
FAQ - Results
Field strength

The field strength is measured in tesla (T). The MR scan with BIOTRONIK systems requires the use of a clinical MRI scanner with a closed bore, cylindrical magnets and a static magnetic field strength of 1.5 T or 3 T.

Isocenter position

The isocenter position is an MR condition that describes the permissible scan areas of the patient. Regarding the isocenter position you can find two possible scan conditions:

Full body  will be shown for BIOTRONIK products that have been tested under the conditions of an MR scan and are approved as MR conditional without a scan exclusion zone.

Hip and eye  will be shown for BIOTRONIK products that have been tested under the conditions of an MR scan and are approved as MR conditional with a scan exclusion zone.

Hip and eye - permissible positioning zone

General considerations  The permissible positioning zone explained below must always be maintained during MR scans of patients with restricted device systems.

Isocenter  Starting from the feet, the permissible positioning zone for the isocenter of the high-frequency coil is at the greater trochanter level. Starting from the top of the skull, the permissible positioning zone for the isocenter is at the level of the eyes or the lower edge of the eye socket. In practice, this means that the marker line of the MRI scanner's laser positioning marks must be within this zone. However, receiver only coils can also be positioned outside this area.

Field of view  An MRI scanner's field of view is the area within which imaging data can be obtained. The scan exclusion zone is determined by the MRI scanner's field of view and the size of the patient.

Slew rate

The slew rate of the MRI scanner's gradient fields is shown in tesla per meter per second per axis (T/m/s per axis). This website shows the maximum for the slew rate value, which must not be exceeded during the scan. Note: A maximum slew rate of 125 T/m/s per axis is valid for Evia, Entovis, Estella and Ecuro models up to and including serial number 66237094.

Whole body SAR

The mean specific absorption rate (SAR) for the whole body is shown in watts per kilogram (W/kg). This website shows the maximum value for the whole body SAR. It must not be exceeded during the scan.

 

Caution: Detailed information about ProMRI can be found in the ProMRI System Technical Manual. Please contact your local BIOTRONIK representative.